Home    News    Tool Box    About    Search   
article categories
Automotive
Computer
Electronics
Food and Cooking
Home Improvement
Household
Personal Finance
Pets and Animals
Pool and Spa
Recreation Vehicle - RV
article categories
How To Videos
SUBMIT ARTICLE Newsletter Signup
Newsletter Archive
DIY Links and Resources
Advertise Here

Lumber Liquidators

NorthernTool.com

Interstate Batteries.com

Once You Know, You Newegg

Tool King Service, Selection, Satisfaction

Changing a Toilet Wax Ring

By Mark Donovan

If there is water slowly leaking around the base of your toilet, or you constantly smell a foul odor in your bathroom chances are the toilet wax ring has begun to fail and it is time for it to be replaced.

A toilet wax ring is pretty much described by its name. It is a 1 to 2 inch thick ring of wax, frequently found surrounding a plastic funnel. The toilet wax ring works by forming a water/air tight seal between the base of the porcelain toilet base and the toilet flange (plastic or cast iron).

If a toilet rocks when it is sat upon, over time the toilet wax ring will breakdown and fail. This failure manifests itself in the formation of small water and odor leaks around the base of the toilet. If left unchecked, damage could occur to the bathroom floor and unsafe sewer gasses may build up in the home.

A new toilet wax ring should also be replaced any time a toilet is removed (e.g. during the installation of a new bathroom floor).

Replacing a toilet wax ring is easy to do and can be done by the do it yourself homeowner with a little knowledge and some preparation. Replacing a toilet wax ring can be done in about 1 hour assuming there are no extenuating circumstances.

The basic steps required to change a toilet wax ring begin with turning off the water supply line and emptying the tank and bowl of water. The supply line also needs to be disconnected from the toilet.

Next the anchor nuts, secured to the Hold-Down bolts, need to be unscrewed.

The toilet is then lifted off the toilet flange and turned over.

The old toilet wax ring can then be scraped and removed off the base of the toilet, and the floor can be cleaned of any old wax ring residue.

The new toilet wax ring is then pressed onto the base of the toilet and the toilet is then reseated onto the toilet flange.

The anchor nuts are then re-screwed back onto the Hold-down bolts and the supply line reconnected.

The water supply line to the toilet can then be turned back on and the toilet is back in business.

For more help on changing a toilet wax ring see the Changing a Toilet Wax Ring EBook from HomeAdditionPlus.com. The Changing a Toilet Wax Ring EBook will quickly explain to you in detail the step-by-step process for changing the wax ring on a toilet and includes how-to pictures for every key step in the process.

Over the past 20+ years Mark Donovan has been involved with building homes and additions to homes. His projects have included: building a vacation home, building additions and garages on to existing homes, and finishing unfinished homes. For more home improvement information visit http://www.homeadditionplus.com and http://www.homeaddition.blogspot.com.

Article Source: http://EzineArticles.com/?expert=Mark_Donovan
http://EzineArticles.com/?Changing-a-Toilet-Wax-Ring&id=216279

  Did You Know...  
The Bugatti Veyron 16.4 is currently the fastest, most powerful, and most expensive street-legal full production car in the world, with a proven top speed of over 400 km/h (407.5 km/h or 253.2 mph)
Source: Wikipedia

Fun fact# 50

    © DC Systems 2014    
home | news | Tool Box | contact
      Get Firefox!